Почему-то не пишется автоматизация Халион 3 в Кубейсе 3. По идее, ручки фильтров Халиона должны двигаться и звук меняться...
Что не так сделал? Вроде все как в мануале к Халиону 3:
Recording dynamic control settings
Proceed as follows to record dynamic control settings within the
HALion window onto a Cubase SX track:
1. In Cubase, open the Preferences dialog on the MIDI Filter page and
switch off the “Sysex” filter.
In Cubase SX, this filter is activated by default. By deactivating it, you enable Cubase
SX to record SysEx data.
If in doubt, please read the document “System Exclusive Handling”. It
can be found on the Cubase SX Program DVD and contains detailed information
on recording and editing SysEx data.
2. Create a separate empty MIDI track for the automation data that you
wish to record.
This way, if something goes wrong, you can simply delete the automation data and try
again.
3. Set the output of the track so that it sends to the desired HALion
channel.
4. Open the HALion window and make sure that the correct sound and
channel are selected for automation and recording.
5. Press the Record button in Cubase SX to start recording.
Dynamically change the control settings as desired.
6. Stop recording and rewind. Then start playback.
The controls in the HALion window should now dynamically move and reflect the
settings you have made.
[ADDED=Кетцалькоатль]1135103137[/ADDED]
Что не так сделал? Вроде все как в мануале к Халиону 3:
Recording dynamic control settings
Proceed as follows to record dynamic control settings within the
HALion window onto a Cubase SX track:
1. In Cubase, open the Preferences dialog on the MIDI Filter page and
switch off the “Sysex” filter.
In Cubase SX, this filter is activated by default. By deactivating it, you enable Cubase
SX to record SysEx data.
If in doubt, please read the document “System Exclusive Handling”. It
can be found on the Cubase SX Program DVD and contains detailed information
on recording and editing SysEx data.
2. Create a separate empty MIDI track for the automation data that you
wish to record.
This way, if something goes wrong, you can simply delete the automation data and try
again.
3. Set the output of the track so that it sends to the desired HALion
channel.
4. Open the HALion window and make sure that the correct sound and
channel are selected for automation and recording.
5. Press the Record button in Cubase SX to start recording.
Dynamically change the control settings as desired.
6. Stop recording and rewind. Then start playback.
The controls in the HALion window should now dynamically move and reflect the
settings you have made.
[ADDED=Кетцалькоатль]1135103137[/ADDED]
Это как я понял ручки cutoff и другие в этом роде или нет?
