Softube - Обсуждаем новые релизы, баги и прочее. (1 онлайн
- Автор темы SoNick
- Дата начала
Пришло время для расширенной версии.
- Скачивание (всё и по отдельности)
- Удаление установленных плагинов (всё и по отдельности)
- Установка плагинов из папки (всё и по отдельности)
Для использования функции установки и удаления - приложение нужно запустить с правами администратора.
Кнопка "УСТАНОВКА" по умолчанию выбирает папку куда всё скачалось.
Папка "Softube_Downloads" находится в папке с приложением.
Нажимаем на "Выбор папки".
Первый установщик требует запуска GUI, остальные устанавливаются в silent mode.
Процесс установки отображается в окне ниже
Процесс удаления отображается в окне ниже
Для примера, процесс удаления пяти плагинов занял ~1,5 секунды суммарно)
Само приложение и исходники на Python во вложении.
Окно установки, с возможностью выбрать установки всего сразу или по отдельности.
Окно удаления, с возможностью выбрать удаления всего сразу или по отдельности.
Вобщем, это полноценный менеджер: качай, устанавливай, удаляй.
Полностью заменяет все предыдущие скрипты для powershell и офф приложение (кроме активации на ilok).
- Скачивание (всё и по отдельности)
- Удаление установленных плагинов (всё и по отдельности)
- Установка плагинов из папки (всё и по отдельности)
Для использования функции установки и удаления - приложение нужно запустить с правами администратора.
Кнопка "УСТАНОВКА" по умолчанию выбирает папку куда всё скачалось.
Папка "Softube_Downloads" находится в папке с приложением.
Нажимаем на "Выбор папки".
Первый установщик требует запуска GUI, остальные устанавливаются в silent mode.
Процесс установки отображается в окне ниже
Процесс удаления отображается в окне ниже
Для примера, процесс удаления пяти плагинов занял ~1,5 секунды суммарно)
Само приложение и исходники на Python во вложении.
Окно установки, с возможностью выбрать установки всего сразу или по отдельности.
Окно удаления, с возможностью выбрать удаления всего сразу или по отдельности.
Вобщем, это полноценный менеджер: качай, устанавливай, удаляй.
Полностью заменяет все предыдущие скрипты для powershell и офф приложение (кроме активации на ilok).
Вложения
release notes обновился, но дата от 12 августа все равно.
New Products:
- Equalizers
- Core Vintage Equalizers
All products:
- Fixed an issue in Pro Tools where delay compensation was not working properly in 96kHz
Console 1 System:
- Added support for the following Plugin Alliance plug-in: elysia alpha compressor V2.
Model 80 Five Voice Syntheziser:
- Added presets made by Nicholas Semrad, these presets where previously downloadable from the product website.
Valley People Dyna-Mite Slam & Gate:
- Fixed output meter scaling.
Надеюсь это последняя версия.
Т.к. приложения на Python, созданные одним файлом, распаковывают во временную папку ~1000 файлов.
То для ssd это не прикольно.
Во вложении:
- исходники
- основное приложение с временными файлами внутри
- приложение, как и раньше одним файлом (оставлено, если очень надо "один файл")
Changelog:
- Отключение распаковки в temp на ssd
- Теперь кнопка "Стоп" работает и при установке.
Когда вы нажимаете "Стоп", программа не прерывает текущую установку. Она дожидается ее полного и корректного завершения. После этого скрипт установки завершается.
- Теперь при нажатии на кнопку "УДАЛЕНИЕ" скрипт ищет в системной папке только Softube Uninstall (актуально для пользователей Console 1).
- Подсчет файлов. Перед открытием окна выбора в лог теперь выводится точное количество найденных программ, подходящих для удаления.
- Полностью "тихий режим" установки, без появления окон.
Тесты:
- скачивание 121 плагина ~10 минут
- установка всех плагинов ~30-35 минут
- удаление всех плагинов 1-2 секунды
Т.к. приложения на Python, созданные одним файлом, распаковывают во временную папку ~1000 файлов.
То для ssd это не прикольно.
Во вложении:
- исходники
- основное приложение с временными файлами внутри
- приложение, как и раньше одним файлом (оставлено, если очень надо "один файл")
Changelog:
- Отключение распаковки в temp на ssd
- Теперь кнопка "Стоп" работает и при установке.
Когда вы нажимаете "Стоп", программа не прерывает текущую установку. Она дожидается ее полного и корректного завершения. После этого скрипт установки завершается.
- Теперь при нажатии на кнопку "УДАЛЕНИЕ" скрипт ищет в системной папке только Softube Uninstall (актуально для пользователей Console 1).
- Подсчет файлов. Перед открытием окна выбора в лог теперь выводится точное количество найденных программ, подходящих для удаления.
- Полностью "тихий режим" установки, без появления окон.
Тесты:
- скачивание 121 плагина ~10 минут
- установка всех плагинов ~30-35 минут
- удаление всех плагинов 1-2 секунды
Последнее редактирование:
Для просмотра скрытого содержимого необходимо Войти или Зарегистрироваться.
Последнее редактирование:
Release Notes for version 2.6.15 (Released on September 23rd, 2025)
Equalizers:
New features:
Added spectrum analyzer options menu, accessed through the settings icon in the top-right of the interface.
Added 4 configurable EQ curve display ranges: +/- 3 dB, +/- 6 dB, +/- 12 dB, and +/- 24 dB.
EQ curve display range automatically expands when dragging EQ points or adjusting gain sliders beyond current display range bounds.
Added zoom in/out buttons to the top-right corner for manual EQ curve display range adjustment.
UX improvements:
When a band is soloed, all other bands are now grayed out while keeping the soloed band in focus.
Pressing the "VINTAGE" button now automatically opens the module menu when no vintage equalizer is loaded.
Added X-axis margin to modern EQ band menus to prevent stereo mode controls from being cut off by the resize handle.
Added extra margin when needed to ensure EQ dots are always easily reachable.
Fixed vintage equalizer not closing when clicking to the left or right of the vintage equalizer interface.
Modern EQ now highlights and focuses only one band's curve at a time for clarity.
Focused and highlighted modern dynamic bands are now easier to see.
Modern EQ now highlights the curve of a band you are tweaking from the band's menu.
Bug fixes:
Fixed some factory presets getting marked as "changed" immediately after loading.
Fixed EQ curve for filters with high Q values not showing the correct gain in dB.
Fixed issues with EQ dot lines getting out of sync with the EQ curves.
Fixed vintage equalizer channel mode labels not updating when loading a different vintage equalizer.
Fixed vintage equalizer streaming bugs when switching between presets containing the same vintage equalizer in different enabled states.
Fixed an issue where a modern band's menu couldn't be opened if its EQ dot was too close to another band.
Fixed an issue where automation of parameters didn't show up in Pro Tools for mono and mono->stereo channel configurations.
Equalizers:
New features:
Added spectrum analyzer options menu, accessed through the settings icon in the top-right of the interface.
Added 4 configurable EQ curve display ranges: +/- 3 dB, +/- 6 dB, +/- 12 dB, and +/- 24 dB.
EQ curve display range automatically expands when dragging EQ points or adjusting gain sliders beyond current display range bounds.
Added zoom in/out buttons to the top-right corner for manual EQ curve display range adjustment.
UX improvements:
When a band is soloed, all other bands are now grayed out while keeping the soloed band in focus.
Pressing the "VINTAGE" button now automatically opens the module menu when no vintage equalizer is loaded.
Added X-axis margin to modern EQ band menus to prevent stereo mode controls from being cut off by the resize handle.
Added extra margin when needed to ensure EQ dots are always easily reachable.
Fixed vintage equalizer not closing when clicking to the left or right of the vintage equalizer interface.
Modern EQ now highlights and focuses only one band's curve at a time for clarity.
Focused and highlighted modern dynamic bands are now easier to see.
Modern EQ now highlights the curve of a band you are tweaking from the band's menu.
Bug fixes:
Fixed some factory presets getting marked as "changed" immediately after loading.
Fixed EQ curve for filters with high Q values not showing the correct gain in dB.
Fixed issues with EQ dot lines getting out of sync with the EQ curves.
Fixed vintage equalizer channel mode labels not updating when loading a different vintage equalizer.
Fixed vintage equalizer streaming bugs when switching between presets containing the same vintage equalizer in different enabled states.
Fixed an issue where a modern band's menu couldn't be opened if its EQ dot was too close to another band.
Fixed an issue where automation of parameters didn't show up in Pro Tools for mono and mono->stereo channel configurations.
Softube "отпочковали" восемь отдельных плагинов. Как я понял должны быть лицензии на полные версии, тех модулей откуда их выдернули.
British Class A Equalizer
British Class A Compressor
British Class A Drive
Doom Chvrch
Kraft
Model 72 Envelope Filter
Model 77 Reverb
Model 84 Chorus
New Products:
Empirical Labs Professor Punch-Knuckles
Empirical Labs Complete Collection 2
Flow Mixing Suite:
Added the following native plug-ins to the subscription:
Empirical Labs Professor Punch-Knuckles
British Class A Equalizer
British Class A Compressor
British Class A Drive
Doom Chvrch
Kraft
Model 72 Envelope Filter
Model 77 Reverb
Model 84 Chorus
Added Flows for Guitar and Bass sounds.
Added Flows, including Empirical Labs Professor Punch-Knuckles.
Added amps, cabs, and pedals as loadable modules.
Added Empirical Labs Professor Punch-Knuckles as a loadable module.
Added 4.5dB/oct slope in the FFT settings.
Fixed an issue where modules could load disabled.
Flow Mastering Suite:
Updated GUI, new Flow Menu and Gear menu.
Updated parameter set (breaking change: saved projects with this version and onwards is not possible to open with earlier versions of Flow Mastering Suite).
Updated the number of possible modules to load from 10 to 30.
Added the following plug-ins to the subscription:
Deesser
Equalizer
Added a Flow for Orchestral music.
Added Flow Pack from Maor Appelbaum.
Added 4.5dB/oct slope in the FFT settings.
Fixed an issue where modules could load disabled.
Added User Signal Chain indicator.
Fixed an issue where modules had the wrong contextual information.
Fixed an issue where click-areas were misaligned in Weiss EQ1.
Fixed an issue where keyboard focus wasn't released correctly.
Fixed an issue where plug-ins in the signal chain were not drawn correctly when the Goniometer was shown.
Console 1 System:
Added support for the following Plugin Alliance plug-ins:
Bettermaker Passive Equalizer
Millennia NSEQ-2
Millennia TCL-2
Purple Audio MC 77
SPL BiG
SPL IRON
SPL Machine Head
SPL Passeq
SPL Transient Designer Plus
SPL TwinTube
SPL Vitalizer MK2-T
Vertigo VSC-2
Vertigo VSM-3
Vertigo VSS-2
Added EQ curve data in Pro Tools for third-party plug-ins loaded as modules in Console 1 System.
Fixed a crash in the On-Screen Display when using UAD plug-in scenes in Apollo Central mode.
Improved meter performance in the Cubase DAW integration.
Fixed an issue where LED lights on connected HWs didn't blink when using bypass.
Fixed an issue where UADx Verve Analog Machines or UADx Verve Essentials could crash Console 1 System.
Amp Room:
Fixed a crash happening in Logic Pro 11.2.1 when running in Rosetta mode.
Added AAX Automation highlights to the following plug-ins:
Core Vintage Dual Equalizer
Core Vintage Equalizer
Deesser
Vocal Tuner
Weiss Exciter
Equalizers:
Fixed an issue where bypass broke in Equalizers with certain vintage EQs loaded.
Extended Features:
Improved metering performance resulting in less CPU load per plug-in.
Fixed an issue where quick changes to the headroom parameter could lead to volume spikes.
Fixed an issue where some metering configurations didn't show correctly.
Model 77 Dual Layer Synth:
Fixed an issue where the synced random LFO would ignore the DAW's bpm and run at a faster rate.
Trident A-Range and Transient Shaper:
Fixed issues with click-areas.
Weiss Exciter:
Added preset pack from Maor Appelbaum.
Weiss DS1-MK3:
Lowered silence detection threshold from -80 dBFS to -140 dBFS to prevent truncation of low-level audio content.
All Products with Extended Features:
Fixed an issue where the Extended Features uninstaller didn't work properly.
Console 1 System:
Improved stability of installation process.
Equalizers:
Fixed an issue where loaded vintage EQs didn't use the correct downsampling filter leading to some additional aliasing.
Weiss plug-ins:
Fixed an issue during scanning of the AU-format.
British Class A Equalizer
British Class A Compressor
British Class A Drive
Doom Chvrch
Kraft
Model 72 Envelope Filter
Model 77 Reverb
Model 84 Chorus
Release Notes for version 2.6.16 (Released on October 7th, 2025)
New Products:
Empirical Labs Professor Punch-Knuckles
Empirical Labs Complete Collection 2
Flow Mixing Suite:
Added the following native plug-ins to the subscription:
Empirical Labs Professor Punch-Knuckles
British Class A Equalizer
British Class A Compressor
British Class A Drive
Doom Chvrch
Kraft
Model 72 Envelope Filter
Model 77 Reverb
Model 84 Chorus
Added Flows for Guitar and Bass sounds.
Added Flows, including Empirical Labs Professor Punch-Knuckles.
Added amps, cabs, and pedals as loadable modules.
Added Empirical Labs Professor Punch-Knuckles as a loadable module.
Added 4.5dB/oct slope in the FFT settings.
Fixed an issue where modules could load disabled.
Flow Mastering Suite:
Updated GUI, new Flow Menu and Gear menu.
Updated parameter set (breaking change: saved projects with this version and onwards is not possible to open with earlier versions of Flow Mastering Suite).
Updated the number of possible modules to load from 10 to 30.
Added the following plug-ins to the subscription:
Deesser
Equalizer
Added a Flow for Orchestral music.
Added Flow Pack from Maor Appelbaum.
Added 4.5dB/oct slope in the FFT settings.
Fixed an issue where modules could load disabled.
Added User Signal Chain indicator.
Fixed an issue where modules had the wrong contextual information.
Fixed an issue where click-areas were misaligned in Weiss EQ1.
Fixed an issue where keyboard focus wasn't released correctly.
Fixed an issue where plug-ins in the signal chain were not drawn correctly when the Goniometer was shown.
Console 1 System:
Added support for the following Plugin Alliance plug-ins:
Bettermaker Passive Equalizer
Millennia NSEQ-2
Millennia TCL-2
Purple Audio MC 77
SPL BiG
SPL IRON
SPL Machine Head
SPL Passeq
SPL Transient Designer Plus
SPL TwinTube
SPL Vitalizer MK2-T
Vertigo VSC-2
Vertigo VSM-3
Vertigo VSS-2
Added EQ curve data in Pro Tools for third-party plug-ins loaded as modules in Console 1 System.
Fixed a crash in the On-Screen Display when using UAD plug-in scenes in Apollo Central mode.
Improved meter performance in the Cubase DAW integration.
Fixed an issue where LED lights on connected HWs didn't blink when using bypass.
Fixed an issue where UADx Verve Analog Machines or UADx Verve Essentials could crash Console 1 System.
Amp Room:
Fixed a crash happening in Logic Pro 11.2.1 when running in Rosetta mode.
Added AAX Automation highlights to the following plug-ins:
Core Vintage Dual Equalizer
Core Vintage Equalizer
Deesser
Vocal Tuner
Weiss Exciter
Equalizers:
Fixed an issue where bypass broke in Equalizers with certain vintage EQs loaded.
Extended Features:
Improved metering performance resulting in less CPU load per plug-in.
Fixed an issue where quick changes to the headroom parameter could lead to volume spikes.
Fixed an issue where some metering configurations didn't show correctly.
Model 77 Dual Layer Synth:
Fixed an issue where the synced random LFO would ignore the DAW's bpm and run at a faster rate.
Trident A-Range and Transient Shaper:
Fixed issues with click-areas.
Weiss Exciter:
Added preset pack from Maor Appelbaum.
Weiss DS1-MK3:
Lowered silence detection threshold from -80 dBFS to -140 dBFS to prevent truncation of low-level audio content.
Release Notes for version 2.6.17 (Released on October 10th, 2025)
All Products with Extended Features:
Fixed an issue where the Extended Features uninstaller didn't work properly.
Console 1 System:
Improved stability of installation process.
Equalizers:
Fixed an issue where loaded vintage EQs didn't use the correct downsampling filter leading to some additional aliasing.
Weiss plug-ins:
Fixed an issue during scanning of the AU-format.