The Module Selector performs multiple functions (figure 4.1). First; it allows you to select the different modules in AmpliTube Jimi Hendrix, second; it displays the dual signal paths. Another function of the Module Selector is to select and display eight different signal paths.
Dual Signal Paths
AmpliTube Jimi Hendrix provides two discrete signal paths; each one containing STOMP box, AMP, CAB, and RACK modules. Through the eight available presets, these two signal paths can be configured in multiple variations allowing a tremendous amount of flexibility. This is a very important feature because it allows you to route your guitar signal to multiple amplifiers or cabinets; create two separate six stomp pedal setups or create one big twelve pedal setup.
The Preset buttons located to the left of the Module Selector allow you to change the signal path of the guitar rig (figure 4.2). Clicking on the individual buttons (from 1 to 8) or using the Up/Down arrows will allow you to select different signal paths.
For example;
1: all stomp effects and rack effects into one amp rig.
2: two separate amp setups.
3: all stomp effects and rack effects into one amp rig with both cabinets.
4: all stomp effects and rack effects into both amp rigs.
5: two separate stomp effects setups into one amp with two cabinet setups.
6: two separate amp setups with separate stomps into two independent
rack effects.
7: two separate stomp effects setups into two separate amp rigs into all the
rack effects.
8: two separate stomp effects setups into one amp setup with all the rack
effects.
Selecting Modules
Once the signal path for the guitar rig is set up, you can easily navigate the different AmpliTube Jimi Hendrix modules via the Module Selector. To select a particular module, just click on it (figure 4.3). This option allows you to easy access to any module on either of the dual signal path. Clicking on the module buttons below (TUNER, STOMP, AMP, CAB, and RACK) selects the first module of the two available in the chain.[/b]
Как понимаю можно в каждой ячейке разные настройки сохранить, или что? То есть в каждом пресете есть ещё 8 пресетов? Или они рандомом перенастраиваются там?
