AlexLazer, я тут обнаружил, что у тебя клавиша А-300, как у меня, правда, с названием Роланд. После апдейта 12.2.1.180 наконец то в СЭМе в Hardware Control можно запрограммировать пэды, питч и сами зубы , но миди-посылы слайдеров, крутилок и других кнопок обнаружить не удалось. Ты смог добиться этого? Я понимаю, что это проблема А-300. Может из стандартных карт есть пресеты?
Не хочется переходить на Sonar. В СЭМ мне не хватает только этого. Я только вчера нашел апдейт (сразу прекратил качать Sonar X2), но ночи не хватило, чтоб со всем разобраться.
Изменения в обновлении Samplitude Pro X (Suite) 12.2.1.180
Vandal: Problems with stomp boxes -fixed
Manager crashes with big projects -fixed
Problems with Hardware Controller -fixed
Crash with Preset lists in MAGIX Plug-ins -fixed
Mixer / FX / Instruments
Occasional Multi-CPU errors when bouncing surround projects (Stereo bounce or bounce with activated
Stereo Downmix) -fixed
Performance problems with RME USB Interfaces using USB3 -fixed
Fixes for MAGIX Plug-ins (Vintage FX Suite Plug-ins sometimes couldn't be loaded)
Play start could still take long with many objects and activated Resampling -fixed
Hardware Controller
"MCU Pro" and "MCU XT Pro" Factory Presets added
Mackie XT internal mode pre set to Mackie_Set, for Mackie XT can serve as main unit with channels 1~8 if
set up left of the MCU.
Masterfader was not updated after opening project -fixed
Automation LEDs were not updated after track change on controller -fixed
Mute and Solo-LEDs were not updated after Bank-Switch -fixed
Tascam US-2400: Bank LEDs didn't work -fixed
Crash in Hardware Controller Setup if many MIDI-messages were received at this time -fixed
Problems with Peakmeters if turned off in Arranger ) -fixed
Crash when creating a new project with activated EUCON Controller -fixed
Wrong Reset value for EQ Q-Control -fixed
General problems when using subcontrols (Problem when using a copy of a control and subcontrols) -fixed
Control update in Flip Mode (Alphatrack Flip Mode fader update, if Flip-relation changes from one Encoder
knob to another) -fixed
Flip Mode controlled wrong controls -fixed
Flip Mode did not control Encoder-LEDs -fixed
Canceling the import workflow left a nameless controller in the configuration -fixed
Import of .cpsxml files didn't work correctly -fixed
Import of current files into ControlPannelsB2 folder are saved separately -fixed
The used name at import is not used in the configuration -fixed
Auto save of changed controller templates didn't work correctly -fixed
Encoder-LEDs only worked in PAN Mode -fixed
Problems with rearranging controllers in tree view -fixed
Button-LEDs changed also when button was toggled with a Modifier -fixed
Improved synchronization for changed MIDI Ports
Improvements for visually impaired users
Record Visualization is now at identical position as normal Visualization
General
Sometimes empty Mixer after opening first project -fixed
Docker buttons "<" ">" didn't work sometimes -fixed
Sometimes faulty windows title with floating Managers -fixed
Some Fixes for SysX-Editor
Marker on Silence in Wave Editing now recognizes buttons "only left/only channel" for analysis
Double layered objects were sometimes not deleted at project loading -fixed
Audio Quantization Wizard only showed up vertically -fixed
Но если донгл вытащить. То ничего не идёт...
